GrinShop, is a support for soft drinks can 330ml to 470ml (standard), ergonomic, removable and adaptable. Designed to maintain the temperature of your soft drink, since it avoids direct contact of the hand with the can. In addition, the neck of the GrinShop, is the one that will have contact with the mouth of the user, so it will avoid the exposure of the user to bacteria and organism present in the can. GrinShop gives personalization to your soft drink. You will not lose your drink among many others in an event. GrinShop exclusivity guaranteed.
GrinShop, has an elegant and sophisticated design, customizable in color, conceived for PLA for being more friendly with the environment.
Made up of only 4 pieces that can be assembled, making it ideal for mixing colors and filaments such as; pla, abs, nylon, etc. (It is recommended for the neck to use PLA, because it has direct contact with the user's lips).
PARTS:
GrinShop consists of four (4) pieces.
-TAPE
-CUELLO
-ASA
-BASE
ASSEMBLY:
-neck and handle: To assemble GrinSchop you must take the "NECK" offset meeting point of the hinges to give more space and flexibility. Then, put "HANDLE" horizontally and diagonally, from top to bottom, taking care to fit the joint. Anchor one male and then the other. Relax "NECK", and return to its original position.
-cap: In the upper hinge of the neck, insert the cap taps diagonally downwards, taking care to open the "NECK".
-base: insert extensible "BASE", in female "ASA".
PS: To disassemble GrinShop, follow the instructions opposite to the whole assembly process.
MODE OF USE: Lengthen "ASA" of union "BASE", incorporate soda can and press neck until adherence. Orientate the soda tab (opening mouth) to where the user prefers to take the handle (either right or left), then shorten the "BASE" joint handle to the size of the soda. Push in well. Finally open your soda and enjoy it together with GrinShop
You can also turn your GrinShop into a personal pitcher!!, just remove the top lid of your canned soft drink of your choice, leaving the edge of the joint well polished, to fix with GrinShop and ready. you have your pitcher!!
It is not recommended to leave GrinShop to high temperature exposure for a long time (over 20ΒΊ) as it may affect the accuracy of its mechanical parts.
GrinShop is a removable and adaptable standard 330ml to 470ml canned sodas support. Thought-out to preserve the temperature of your drink, since prevents direct hand contact with the can. In addition, GrinShop neck will be the section to have contact with the user's mouth, avoiding the user's exposure to bacteria and other organisms present in the can. GrinShop gives customization to your soda. You will no longer lose your drink among many others in an event. GrinShop exclusivity guaranteed.
GrinShop has an elegant and sophisticated design, customizable in color, conceived for PLA for being more friendly to the environment.
Made up of only 4 assembled pieces, they make it ideal for mixing colors and filaments such as; pla, abs, nylon, etc. (It is recommended to use PLA for the neck, as it has direct contact with the user's lips.)
PARTS:
GrinShop consists of four (4) pieces.
-TOP
-NECK
-HANDLE
-BASE
ASSEMBLY:
-neck & handle: To assemble GrinSchop you must take the "NECK" offset the meeting point of the hinges to give more space and flexibility. Then, put the "HANDLE" horizontally and diagonally, from top to bottom, taking care to fit the joint. Anchor one male and then the other. Relax the "NECK", and return to its original position.
-top: In the upper hinge of the neck, insert males of the cap diagonally downward, taking care of the opening of the "NECK"
-base: insert "BASE" extensible, in the "HANDLE" female.
PS: To disassemble GrinShop, follow the opposite assembly instructions process.
HOW TO USE: Extend "HANDLE" from the "BASE" junction, add a soda can and press the neck until it adheres. Orient the tab of the can (opening hole) towards user's preference to take the handle (either right-handed or left-handed), then adjust the "HANDLE" / "BASE" joint to the size of the can. Press well. Finally open your soda and enjoy it with GrinShop.
You can also turn your GrinShop into a personal jug!!, you just have to remove the top cover of your favorite soda can, leaving the joint edge well polished, fixing it with GrinShop and voila. you already have your jug!
It is not recommended to leave GrinShop exposed to high temperatures for a long time (about 20ΒΊ) since it can affect the precision of the mechanical parts.