IN____________________________________
This tube design ventilation allows circulate and filter the air inside so that it doesn't smell as much as resin.
This model can be printed whole or in parts.
To install this system, the bottom and side covers must be removed. disconnect all the cables from the motherboard, (be very careful with the cable from the display) take out the motherboard carefully, take apart the 30x30x10 fans. You will have to mark and make a hole in the back of the printer, the warranty is lost.
Install the NOCTUA 60x60x25 fan to the printed tubes with M3x40 screws. Install the piece to move the motherboard as seen in the attached image. Reconnect everything to the motherboard, in my case connect the red and black cable of the fan with the original connection of the 30x30 fan replacing it. The tube must be adapted to the USB connection of the motherboard and the big fan bolts with the electric soldering iron or with a heat gun. The project is under improvement but the design published works well. To make it work better, insert the filters into the photon boxes, those bags are useless.
TOOLS:
electric welder
Allen keys (those of the photon)
tweezers
double-sided tape
EN____________________________________
This design of ventilation pipes allows the air inside to circulate and filter so that it does not make as much smell of resin.
This model can be printed as a whole or in parts.
To install this system you have to remove the bottom and side covers. disconnect all cables from the mainboard, (be careful with the display cable) remove the mainboard carefully disassemble the fans 30x30x10. You will have to mark and drill a hole on the back of the printer, the warranty will be lost.
Install the NOCTUA 60x60x25 fan to the printed tubes with M3x40 screws. Install the piece to move the motherboard as shown in the attached picture. Reconnect everything to the motherboard, in my case connect the red and black wire of the fan with the original 30x30 connection replacing it. The tube must be adapted to the USB connection of the mainboard and the screws of the large fan with the electric soldering iron or a heat gun. The project is in the improvement phase, the published design works well. To make it work better insert the filters in the boxes of the photon, those bags are useless.
TOOLS:
electric welder
allen keys (those of the photon)
tweezers
double-sided tape
necessary elements:
M3x40 (4 pcs.)
M3x10 (2 pcs)
https://es.aliexpress.com/item/32999145756.html?src=google&src=google&albch=shopping&acnt=494-037-6276&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&&albagn=888888&albcp=2047572441&albag=80829465588&trgt=743612850714&crea=es32999145756&netw=u&device=c&albpg=743612850714&albpd=es32999145756&gclid=Cj0KCQjw-r71BRDuARIsAB7i_QMsPWycp50J5E5JFzXSLq_FUZrgeXcZ5hYw2Xm47UOm24xcGi9ozHQaAuDoEALw_wcB&gclsrc=aw.ds
https://es.rs-online.com/web/p/guardamanos/5440532?cm_mmc=ES-PLA-DS3A-_-google-_-PLA_ES_ES_Hvac_And_Ventiladores_Y_Control_T%C3%A9rmico-_-Piezas_Para_Ventiladores_Y_Accesorios%7CGuardamanos-_-PRODUCT_GROUP&matchtype=&pla-447066738189&gclid=Cj0KCQjw-r71BRDuARIsAB7i_QNnxjo_jtDnIWnlYHzzvVpckQSt-N4yr3uLSfHEJKKE_9-LmdsDirkaAg6FEALw_wcB&gclsrc=aw.ds
https://noctua.at/es/nf-a6x25-flx/specification