Modular Hydroponic System
Modular Hydroponic System
Published 2019-03-11T11:30:09+00:00
Just download, print, and grow!
My goal is the empower and educate people to grow their own food ... one 3d print at a time! With this modular hydroponic system, you can do just that. The modules are interlocking, so it can be expanded and contracted in size super easily. I'm using the system myself and you can view my progress on Instagram @archipelagourbanfarms or Youtube. Please like, follow, subscribe and spread the word. Let me know if you have any questions! More iterations, upgrades, add-ons to come!
___________________________________________________________________________________
Printed parts: Lid, top reservoir, module x 3, and vaslid.
All Equipment and Supplies Required/Suggested:
As an Amazon Associate, I earn from qualifying purchases.
I get commissions for purchases made through links in this post.
Creality CR-10 (3D printer) - https://amzn.to/3tKNkjI
Hatchbox PLA (filament) - https://amzn.to/30grWmS
2-inch net cups - https://amzn.to/2XuNQ8S
1.5 inch Rockwool Cubes (medium) - https://amzn.to/2G0KIXA
Kasa Smart Plug (timer) - https://amzn.to/3q9sKqN
EcoPlus 728300 Pump, 158 GPH, Black - https://amzn.to/3tKYswO
TotalPond Vinyl Tubing, 1/2 inch (tubing) - https://amzn.to/2L9P9U7
General Hydroponics 3 Part System (nutrients) - https://amzn.to/2LHeWCE
General Hydroponics pH Control Kit (pH up/down) - https://amzn.to/2Jlg3pY
pH Meter: https://amzn.to/3a84W15
Seeds: https://amzn.to/2XzeZmg
Reservoir: IKEA MUSKOT Vase 7 1/2" - https://www.ikea.com/us/en/p/muskot-plant-pot-white-30308197/
LED Lights: https://amzn.to/3aWC0Iq
_____________________________________
Links:
YouTube: https://www.youtube.com/channel/UCL1WZQKbyrSAYk2y8n7KtSg?view_as=subscriber
Instagram: @archipelagourbanfarms
Website:http://www.archipelagourbanfarm.com/
Notes:
The top lid and reservoir require some sort of infill near the bottom of the print to print properly. I only have Cura so I printed those entire pieces at 20%. Print the vase lid at 100%.
The only drawback is that each module kind of takes kind of a long time. I printing at 60mm which is about a 12-hour print.
Holes needed post printing:
Drill 2 small holes on the outside of the top reservoir in order to loop a zip tie through it and hang it on a rack or stand.
Drill 6 small holes on the inside edge of the top reservoir to allow for the nutrient solution to drip onto the net pots below.
Drill several holes on the inside of the cylindrical structure that sits in the middle of the top reservoir. This cylinder helps to prevent overflow in the case of a clog or excessive flow.
Use a small hole saw to make a hole in the center of the module lid in order to allow the tubing to come into the top reservoir.
I tried to incorporate these holes into the design but would end up with a failed print everytime.
Date published | 11/03/2019 |
Time to do | 8 - 18 minutes |
Technology | FDM |
Support Free | YES |
Completed hydroponics system with added bucket lid for 5 gallon buckets.