Vischio (Christmas mistletoe) Sergio Lanna
A Christmas Magnet for your refrigerator or other.
How print in different colors:
To change color you can to cause a filament change and to change
the filament or to use separate .gcode files that you can find here.
I strongly recommend printing through separate .gcode files (one for each
print level), especially if you need to print more than two levels
(colors), because it is a much more precise and reliable method and
because you can print even days away from one level to another (without
removing the part already printed from the print bed)
Only if you use .gcode files:If you do not immediately print the next levels, it is advisable to
heat the print bed, with the previously printed part, for a few minutes
before printing.
Where are .gcode files?:
You must rename the filename.gcode.txt files, available here for download, in filename.gcode
ATTENTION:
.gcode files are setting for: PLA filament with Prusa Mendel i3 clone with 0.4 nozzle.
ITALIANO
Una calamita natalizia per il vostro frigorifero o altro apparecchio metallico.
COME STAMPARE IN DIVERSI COLORI:
Per cambiare colore puoi causare un cambio filamento e cambiare il filamento oppure realizzare dei files .gcode separati.
Io consiglio caldamente di stampare tramite separati file .gcode (uno per
ciascun livello di stampa), specie se è necessario stampare più di due
livelli (colori), perché è un metodo molto più preciso e affidabile e
perché si può stampare anche a giorni di distanza da un livello
all'altro (senza togliere la parte gia stampata dal letto di stampa)
Solo se usi i file .gcode:
Se non effettui immediatamente la stampa dei livelli successivi, è
consigliabile riscaldare il letto di stampa, con la parte stampata
precedentemente, per qualche minuto prima di procedere alla stampa.
Dove sono i file .gcode?
Devi rinominare i file, disponibili qui da scaricare, come nomefile.gcode.txt in nomefile.gcode
I file .gcode sono settati per: Prusa Mendel i3 clone con ugello 0.4
Price | $0.99 |
Category | Household |
Purchases | 1 |
Views | 2517 |
Likes | 0 |
Uploaded | 12/21/2018 |
This work is licensed under the Redpah License.
Vischio.stl | 265 KB |
VischioLev1.gcode.txt | 843 KB |
VischioLev2.gcode.txt | 407 KB |
XmasGifts files descriptions.pdf | 219 KB |
No comments yet!
Please login or register to write a comment.