Christmas Tree Candelabra
$6.99 Christmas Tree Candelabra
Published 2018-11-27T16:58:05+00:00
Hi, if you like this check out my other creations and support me here
Are you pressed for space at your place... not enough space for a large Christmas tree then this could be the solution. A Christmas 'tulip' Tree will make a wonderful piece for your christmas table, as a candelabra in the shape of a christmas tree with tealights twinkling or LEDs lighting your celebrations, or as with a centre piece with little christmas trees and candle flames instead and some tinsel draping over it.
Christmas 'Tulip' Tree is an evolution of the vent candelabras with everything I have learned about them incorperated and comes with two extra files, ornaments that fit in where the Tea-lights go, one a small Christmas tree and one a flame, have fun mixing and matching them with your tea-lights.
Fill the bowls with little trees and get a hillside of christmas trees, or print candle flames in a contrasting colour for fun.
Material PLA
Layer height 0.1mm
Nozle width 0.4mm
Walls 0.8mm
Top/bottom thickness 1mm
Infill 12% minimum, cubic
Print speed 60mm/s
Wall speed 60mm/s
Travel 60mm/s
NO Support needed
Print time 1d 22h 07m
Date published | 27/11/2018 |
Price | $6.99 |
Time to do | 2760 - 2761 minutes |
Material Quantity | 300 grams |
Dimensions | 205.7 x 205.9 x 217.5mm |
Support Free | YES |
Christmas Tree Candelabra