Labyrinth puzzle // infinite
Labyrinth puzzle // infinite
Published 2018-06-18T10:12:25+00:00
Make your own game - using the game as a tool to make it.
//
This is a combination of 2 well known games - puzzle and labyrinth.
During the time you are making the labyrinth, you are playing a game of making a game. The puzzle does not have instructions nor a proper way to solve it. Instead you make your own solution.
When you make your own game - you can play it, or give it to your frend to play the labyrinth.
There is no limit to the number of pieces you use to make the labyrinth and that is the key why I made the labyrinth a puzzle. That and the limitles versions you can do with just a couple of pieces. It is not just another labyrinth you will throw away when you solve it. It is the labyrinth to replace all labyrinths.
The bottom line is...you can print 10,20,50,a 1000 pieces...as many as you want - I guarantey you will have fun playing it.
Also...I didn't really want to make end pieces - it's an infinite puzzle...but than again - someone might whant to use them.
Note that you need a small ball to play the labyrinth. I used a small 3 mm metal ball I had laying around. If you don't have a ball that small you can scale the puzzle appropriately. Note that the tolerances are 0.1 mm on each side so 0.2 mm in total. This printed a perfect fit on my 3D printer. When you scale the part you will get bigger tolerances.
//In the makings//
In the future I plan to make it on couple of levels...stay tuned.
Tolerances are 0.1mm on each side.
You can scale the parts but keep in mind the tolerances.
Printing without supports.
Date published | 18/06/2018 |
Support Free | YES |