Magic Keyboard 2 one finger riser
Magic Keyboard 2 one finger riser
Published 2018-05-04T10:13:13+00:00
This is a minimalist, but perfectly working riser for the tenkeyless Apple Magic Keyboard 2.
It rises the keyboard 12mm (half an inch), the back part also has an opening that allows you to slide the keyboard farther (pictured is the iMac 27")
It comes in two parts, it's easy to put together, most printers have the necessary build area, and it's inexpensive and fast to print, I've printed mine in PLA and is durable, no screws or glue necessary.
I advise against ABS, PETG, nylon and etc., those filaments flex too much for this application, PLA is stiff wich is desirable for something we don't want to be bendable.
Print with some infill and 0.8mm top/bottom walls, 0.2mm layer height (or 0.1mm) is recomended.
If you print from to to bottom, you'll need overhangs for the "horns" at the back, you can also print with the outward sides down, like two (almost) twin towers.
It needs little material, no fasteners or glue.
Date published | 04/05/2018 |