Print-in-Place Moveable Tubing
Support Free
Featured
5,049
views
167
downloads
1
collection
0 comments
Loading comments...
Print-in-Place Moveable Tubing
3D
Published 2015-09-08T10:10:18+00:00
10
0
Add to Collection
Description
Here is a print-in-place moveable tube that can be added on to any design. The reasion for using this object is to allow for tubes to be printed anywhere in a print that will not need support for (a revolving object or a extention bar) and it reduces the assembly after printed. If you look at the cutout drawing you can see how this design is created.
To add this system to your design make sure that the moveable tube is printed vertically and with out support. Once printed twist the end of the tubes till the two tubes are free from each other.
To add this system to your design make sure that the moveable tube is printed vertically and with out support. Once printed twist the end of the tubes till the two tubes are free from each other.
Enjoy
Printing Details
Print in pla with a 20% infill no support.
Technical Information
Date published | 08/09/2015 |
Time to do | 35 - minutes |
Material Quantity | 5 |
Dimensions | 21mm x 21mm x 31mm |
Technology | FDM |
Complexity | Medium |
Support Free | YES |
More Information
Object Parts