Kirov airship from Red Alert
Kirov airship from Red Alert
Published 2016-11-22T10:29:23+00:00
Kirov reporting!
Kirov airship 3D model inspired by the famous strategy game from Westwood Studios/Electronic Arts, Red Alert. I made the model using Autodesk Fusion 360.
Printing settings:
For better tolerance, I printed the model 150% scale for parts:
- body_part_1 - 4.stl,
- wing.stl
- engine.stl
- engine_holder_side.stl
- propeller.stl
- boost.stl
All the other parts should be printed using 145% scaling.
200 micron layer height, 5-10% infill, only the very small parts needs higher infill.
Only keel_part_3.stl needs support, all the other parts can be printed without it.
All the parts take about 20 hours to print, and a half spool of PLA filament.
You only need sanding paper and super glue to put all the parts together.
List of parts, that needed more then once to print:
- engine.stl (5x)
- propeller.stl (5x)
- engine_holder_side.stl (2x)
- engine_holder_back.stl (3x)
- bomb.stl (3x)
- wing.stl (4x)
Date published | 22/11/2016 |
Technology | FDM |
kirov in pices