Q1 mini Quadruped Robot 2.0 (Designed by Jason Workshop)
Q1 mini Quadruped Robot 2.0 (Designed by Jason Workshop)
Published 2017-05-18T08:52:04+00:00
Q1 mini is an open source quadruped robot for everyone!
- Simple design, easy to print and assemble.
- 8 DOF using SG90 servo.
- All-in-one controller board - LinkIt 7697 with Robot Shield and built-in battery.
- Remote control the robot through mobile apps.
Parts:
3D Printed parts (29 Pcs)
LinkIt 7697 with Robot Shield x 1 set
TowerPro SG90 Servo x 8
M1.7 x 8mm Screw x 60
Demo:
http://youtu.be/PH81_TxiiXE
Instructions and downloads:
http://q1.jasonworkshop.com
Q1 FB Page
http://www.fb.com/q1.jasonworkshop
Q1 Store
http://store.jasonworkshop.com
Jason Workshop
http://www.jasonworkshop.com
http://www.fb.com/jasonworkshop
Recommended to use a FDM 3D printer with PLA material. You can print individually piece by piece to match the colors of the original design or optionally print all at the same time.
Date published | 18/05/2017 |
Time to do | 12 - 24 minutes |
Material Quantity | 99 |
Dimensions | 160 x 150 x 70 |