3D model description
A stele (/ˈstiːli/ STEE-lee), when derived from Latin, is a stone or wooden slab, generally taller than it is wide, erected in the ancient world as a monument.
The Stele is heavily inspired by the Motif Monument and I recommend checking it out if you are working on an ITX minimalist build.
The Stele is a minimalist, open, ATX chassis that is fully 3D printable excluding some hardware.
Features:
-About as small as an ATX case can get (approx. 22L)
-Open chassis
-Lots of slots for ziptie/velcro strap cable management
-Vertical or horizontal GPU
-3D printed case
-STEP file to customize Front IO included
-STEP file of full assembly included
-"S" versions of files include some built in support for printing
PC Component Compatibility:
-Full size ATX mobo or smaller
-2x 120mm front fans (optional)
-up to 240mm AIO (mounts to back plate)
-Max GPU Length: 254mm with 2x120mm front fans
-SFX PSU required
-Can hold 1x 2.5" or 3.5" HDD/SSD on back plate
Assembly instructions included with purchase
Recommended Tools:
-Soldering Iron
-Spare filament (Same color as case)
-Screw Driver
Additional Hardware:
-10x M3x6mm screws (for mounting mobo)
-4x M3x10mm screws (for back plate)
-1x M3x6mm screw+nut (for front IO)
-6x M3x10mm screws+nuts (if using Corsair front IO)
-1x M3x8mm screw (for GPU)
-5x M3x12mm screws (for GPU Riser if vertical GPU)
-2x M3x8mm screws (for GPU Vert if Vertical GPU)
-3x M3x16mm screws (if using front fans)
-8x M3x30mm screws (if using front fans)
-2x M3x16mm screwx+nuts (for front fan support arm)
-4x 6-32x1/4" screws (if using AIO)
-Screws to mount AIO fans (if using AIO)
-4x M3x12mm screws+nuts (if using Angled AIO)
-4x power supply screws
-14x M3x20mm MtoF Standoff (for mobo and back plate)
-4x M3x15mm MtoF Standoff (for back plate)
-21x M3 threaded heat inserts (+2x if mounting GPU vertical) (+8x if using front fans)
-8x 1/2" Rubber Cabinet Bumpers
-20cm+ PCIe Riser Cable (if mounting GPU vertical) (I used EZDIY-FAB's)
Pictured setup:
-FrontIO: USB3, USB-C and power button taken from Corsair 5000T
-CPU: AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor
-CPU Cooler: Corsair H100i PRO 75 CFM Liquid CPU Cooler
-Motherboard: MSI MAG B550 TOMAHAWK ATX AM4 Motherboard
-Memory: TEAMGROUP T-Force Delta RGB 32 GB (4 x 8 GB) DDR4-3200 CL16 Memory
-Storage: Intel 660p 2 TB M.2-2280 NVME Solid State Drive
-Storage: Crucial MX500 2TB 2.5" Internal Solid State Drive
-Video Card: MSI GeForce RTX 3060 Ti 8 GB VENTUS 2X OC Video Card
-Power Supply: EVGA SuperNOVA GM 650 W 80+ Gold Certified Fully Modular SFX Power Supply
-Case Fan: Cooler Master MasterFan MF Halo 47.2 CFM 120 mm Fan
-Rizer Cable: 20cm EZDIY-FAB PCIe3.0 90°
-Power Cables: CableMod E-Series ModMesh for EVGA
3D printing settings
3D print Settings:
I printed in PETG for temp resistance.
Some PCs may get too hot for PLA.
I have included "S" versions of some of the files which have some support material built into them.
Several of the parts require the use of supports depending on print orientation.