Easter Basket Set
$6.00 Easter Basket Set
3D
Published 2023-03-23T09:41:11+00:00
Celebrate your egg hunt this Easter with cute 3D printed baskets and printable easter Eggs. All baskets and eggs print without support. The eggs print in place and do not require assembly. A small amount of assembly is required for the basket. The handle prints with small built in brims around the mounting points. Trim the brims off and snap it in to place on the bucket.
The eggs have a print-in-place hidden hinge design. The hinges are tiny but actually pretty sturdy. I have included 3 files for the eggs. I would recommend printing the “Egg Test File” first. The test file is just a section with the hinges not a full egg so not much filament is required. If the test file prints well and hinges operate correctly then use the “Low Tolerance “ egg file. If the hinges stick and do not move with the test file then use the “High Tolerance” egg file.
The baskets are a large print but will fit on an Ender 3 if turned 45 degrees. They can be scaled down if you would like. when printed at 80% they still work well with eggs printed at 100%. Just remember to scale the handle down to match. 😁
I have printed both the basket and eggs using these settings.
.4 or .6 nozzle
.2 layer height for eggs
.2 or .3 layer height for the Unicorn
When using a .4 nozzle I use 3 perimeters
with a .6 nozzle I used 2 perimeters.
10% infill on both egg and unicorn
Z hop on
| Date published | 23/03/2023 |
| Price | $6.00 |