FGC-6 MKI/MKII: UNW 163, 227, 300, 370 SLIM Outer barrels set

as part of the big V24 update. the 14mm ccw barrels have been made a bit stronger

• 14mm CCW threaded tips models have been added ___

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-

this outer barrel is made to work with the fallowing models:
for the FGC-6 MKI
FGC9-MKI UNW163 SLIM shroud or for the FGC6 MKI
https://www.printables.com/model/289957-fgc9-mki-unw163-slim-shroud-or-for-the-fgc6-mki

FGC9-MKI UNW270 SLIM shroud or for the FGC6 MKI
https://www.printables.com/model/289551-fgc9-mki-unw270-slim-shroud-or-for-the-fgc6-mki

for the FGC-6 MKII
FGC9-MKIISD UNW227 SLIM shroud (model C will fit, but will not support the barrel)
https://www.printables.com/model/238242-fgc9-mkiisd-unw227-slim-shroud

FGC9-MKIISD UNW300 SLIM shroud or for the FGC6 MKII (model C will fit, but will not support the barrel)
https://www.printables.com/model/240140-fgc9-mkiisd-unw300-slim-shroud-or-for-the-fgc6-mki

FGC9-MKIISD UNW370 SLIM shroud or for the FGC6 MKII
https://www.printables.com/model/288158-fgc9-mkiisd-unw370-slim-shroud-or-for-the-fgc6-mki

-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long

suppressor 
2x bolt m2,5 18mm or 20mm long

3 piece barrel
1x M3 16mm long

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…