24-12-2023
upload error of the Dove tail mag mount is fixed.
sorry for the that.. I do my best to prevent things like this but sometimes it happens with me being dyslexic
the other mount was from the picatinny rail version that was saved over the dove tail version, so if fine to use, but not compatible with this set.
-
(big V23 and N23 update!)
the 68 cal N23 mount have been added. the original mount is renamed to v23
this matters if you want to chance over to the new N23 mag slide part
also the front mounts have been changed so it haves a better fit with the magazine.
and the wide mag mound have been added as well called NW64. those only work with the N23 mag slides
about the front mounts. I find that the 0.5mm backwards front mounts work the best.
but in case you have a slightly smaller mag by compressing the first view layers of your mag then you might like the 1mm backwards front more. all do I have to say the 0.5mm should work for that one as well.
5-10 2023
the missing T piece have been added
this the P90 model of the UNW P90 platform so you can use the 68 cal mags for it that hold 28 rounds.
do make sure that you have the Tippmann 98 custom with the DOVE TAIL! for more details read the compatibility note:
dropforward
the drop-forward is made so the remote line connection is not in the way of your arm and body. do keep in mind if you use the remoteness with a slide check that they canāt be accidentally be slide on or off. so applying some tape over it might help. or the use of a PTC. if you want to use a small air tank on it. that is possible for things like testing. just be mindful when removing the air tank. by holding the tippmann ASA. so to minimize the stress on the drop-forward
Dove tail VS Picrail version
the picrail version is stronger that is why there is also a stand alone version. the dovetail version had a bit of flex to it. so I did not feel confutable to make a stand alone version for it or at least release itā¦ but the plus side is for the dove tail is that it sits 12mm lower so it looks a bit less tail but you might donāt mind that look. also the flex issue is resolved by having the P90 or Bull pup lower under the shroud.
mag options
like I said before the 28 round UNW P90 mags can be used.
and the Hi cap mag that makes the hopper sit a bit more forward so itās not in the way of your face.
and the G11 styled Tipx mag adapter is also a option in case you donāt like to make your own mags.
Noise
in the past did I made a Bullpup based on a tippmann 98 and did experience it as a marker that does require a ear plug to comfortably play with. at the very least in the ear that will lay on top of the power tube wille firingā¦
the safety
the safety is still usable like it normally would be. but do keep in mind that you donāt forget the safety and just keep pressing the trigger.it may cause damage to the trigger bar.
charging handle cover
there are 2 models one that I have used traditionally, but I also made a LOW model. the low model is a better model to use in regards to prevent rain / dust and dirt getting in the marker. and it might also direct the sound away from your face. the only draw back is that itās not so easy to access the charing handle compared to the up model. but you could not have to use it so often so I think itās worth it.
also as one of the pictures will show. there are older models of tippmann 98ās out there that got the words Custom 98 reased just like the text TIPPMANN. those will use the OLD version of charging handle cover so it clears the text
grip pannel
I have made custom grip panels to make the original tippmann 98 pistol grip look a bit less like a pistil grip. or at the very least a bit less bulky. a note on these is that these donāt work for the E grip kit
Trigger bar
make sure that the trigger bar is sling with low or no resistance in the lower. in order to do so this might require that you sand the ticked parts of the trigger bar a bit so itās smooth. the tight tolerance were done to give in the end a better trigger pull.
ā
compatibility note:
this bullpup lower kit will work only on the
Tippmann 98 Custom NON-Platinum edition (the dovetail version)
for the tip98 platinum model look for the Picatinny rail version
the basic and ACT models can be used
the shortest barrel length is 12 inch unless you donāy mind that the shroud is longer then the barrelā¦
the basic trigger semi auto trigger can be used.
the Tippmann 98 pro trigger is to long. so in case you have a tippmann 98 Pro then you can simply release that part with the stock trigger.
the response trigger kit doesnāt work
but for a faster a lighter trigger pull you could use the E grip kit
the shrouds used for this UNW P90 models donāt support the use of the Flatline
ā
Video Links:
UNW P90 Tippmann 98 edition
https://youtu.be/8RcnAgRBoOQ
UNW P90 Project update: ESG Euro SuperGame 2022 after report
https://odysee.com/@UntangleWORKS:a/UNW-P90-2022-update-ESG-after-report:2
UNW P90: step by step mag function check (and a bit of a update)
https://www.youtube.com/watch?v=BqOoVJ2hh8s
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-function-check:b
UNW P90 MAG VS those... other paintball MAGS
https://www.youtube.com/watch?v=S-up50s3zvo
https://odysee.com/@UntangleWORKS:a/UNW-P90-MAG-VS-those-other-MAGS:2
UNW P90 mag assembly video
https://www.youtube.com/watch?v=eI5-sqQGx0I
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-assembly:b
UNW P90 mag assembly for the open mag version
https://odysee.com/@UntangleWORKS:a/UNW-P90-windows-mag:f
The UNW P90 Hi cap mag or in other words a hopper adapter for the UNW P90
https://www.youtube.com/watch?v=A3yAlBoDHIg
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap:b
UNW P90 Hi cap mag lid
https://www.youtube.com/watch?v=L9vtBMNIMkM
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap-lid:4
UNW P90: Template ring for the P90 airsoft mags
https://youtu.be/kufvl5E0RiU
UNW P90: G11 styled tippmann Tipx mag adapter
https://www.youtube.com/watch?v=_U-nBrJH1hM
https://odysee.com/@UntangleWORKS:a/UNW-P90-G11:a
UNW P90 mag winder
https://youtu.be/v1cIc2swRdg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder:9
UNW P90 mag winder ring
https://youtu.be/KMoFYRpW4_E
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder-ring-B:9
UNW P90 mag speed loader
https://youtu.be/lVzFHDjsehg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader:a
UNW P90 mag speed loader bumper
https://youtu.be/4S5K_jraJXI
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader-bumper:6
materials needed:
charging handle cover
3x M3 bolt 16mm long
drop-forward ASA
1x M5 bolt 25mm long
1x M5 bolt 30mm long
magmount
2x spring, 6mm OD, 0.6mm wire,20mm long
2x M2.5 bolt 16mm long
1x M3 bolt 20mm long
Shroud
4x M3 bolt 25mm long
1x M5 bolt 25mm long
1x M5 bolt 35mm long
2x M3 bolt 30mm long
1x M3 bolt 24mm long
lower
2x spring, 6mm OD, 0.6mm wire,20mm long
3x M3 bolt 20mm long
3x M3 bolt 16mm long
1x M3 bolt 12mm long
1x M3 bolt 35mm long
1x M5 bolt 25mm long
2x M5 bolt 35mm long
1x M3 bolt 26mm long
2x M3 bolt 28mm long
1x M3 bolt 30mm long