Lansky Base
Lansky Base
3D
Published 2022-08-05T08:31:38+00:00
I bought a “Lansky Deluxe 5-Stone Sharpening System”, but unfortunately it does not come with a base, so you have to hold the clamp. The stand isn't mandatory, but helps a lot if you have one.
Before spending $20 buying the base, I decided to print and test my own.
I looked for some projects already made, but didn't like them. This was made as simple as possible. It can be clamped on a table or you can just hold it with your hands. You can also glue some rubber feet or any anti slip material.
There is a slot made to fit the arm and hold the clamp more stable, but if you don't like it, simply rotate the base as shown on the pictures.
Let me know if you have any suggestion for improvements.
--------------------------------------------
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
My printing settings:
Layer: 0.3
Wall: 2.0
Top/Bottom: 2.0
| Date published | 05/08/2022 |
| Time to do | 1 - 2 minutes |
| Material Quantity | 32g |
| Dimensions | 80mm x 80mm 69mm |
| Support Free | YES |