Browning HP35 / Hi Power Pistol (Replica/Prop/Toy)

This model is based of Browning HP made by user TOPRAK on GrabCAD, which is a great model and I want to thank him for it.

The problem with that model was that it was incomplete, so I added all the pins and the bolts, magazine, modified some parts and tolerances so that it could print, function and move properly.

7th January 2023 UPDATE

The model was missing a few internal parts (sear spring, trigger lever and magazine follower) which I added in this update + I made grips thicker than they were in the previous version, grip bolts longer and modified hammer strut.

31st May 2023 UPDATE

Modified the frame around magazine and grips area a bit, added two new version of grips and modified the magazine.
Most importantly, I added another slide, one with a rear tangent sight, and some new internal parts for it, all are named "Early".

On the following link you can see the complete assembly of this pistol. Some of the small internal parts need springs to function, so you don't need to insert all of them if you dont want to.

https://www.youtube.com/watch?v=4ICoapSO3KQ&t=91s&ab_channel=Sivispacem%2Cparabellum.

Model was printed in PLA+.

Like most of these replicas, it will need some sanding so that it could move and function, it won't work as smooth straight off the printer.

There are gcode & 3mf files with my settings for printing, and they work great (for me, at least), you can print and group files however you want, most are oriented in the optimal way for printing.