There are 5 wands and the Deathly Hallows Display in the set.
The tallest part of the display is 23cm. It can be printed with Ender 3 printer. One part Display is also included in the set.
There is a Connector for you to easily assemble some parts. You need to use 1 connector for the upper parts and 3 connectors for the lower parts.
There is a pin that you can attach to the Display to hold the wands.
Wands are also included in the set in both 2-piece and single-piece form.
In the set:
1- Deathly Hallows Wand Display 2- Elder Wand 3- Newt Scamander Wand 4- Leta Lestrange Wand 5- Theseus Scamander Wand 6- Nicolas Flamel Wand
I hope you like it guys!
If you have any questions about my designs or anything, please do not hesitate to send me a message! See you on next projects!
3D PRINTING SETTINGS You can print the Display with 0.15mm Print all wand pieces vertically for better quality. Be sure to print detailed wands with 0.1 mm
50% infill for the wands (use more infill for a stronger model if you're going to play with it) No Support Print Vertically for a better result! :)