Dead Weight Mallet Handle and Head 3D print model

Material: 31.26 grams (0.069 lbs) Infill = 12% Size: 25.4 mm (1") x 53.34 mm (2.1") x 139.7 mm (5.5") Resolution: 0.20mm Layers: 704 layers Rafts: Yes Supports: No Print Time: 4 hr 8 min Function: This is two parts we made in manual lathe class so I tweaked the design to make it 3D printable. One thing we can do since it 3D printed is to hollow the head out so you can put sand, bb's, or lead shot in it to make a "Dead Blow" or "Dead Weight" mallet. ABS will take impact better than PLA so if you plan on really using this a lot you might consider changes materials. If scaled 1:1 then the threads work really well but if you scale it down the threads might need more clearance.