DREMEL - Incrusting inlays Mini Router - Luthery 3D print model

Composed of 2 parts:

• cylinder (to be screwed on Dremel head)
• Sliding base with clamping screw - Open base.

or, (your choice)

• Sliding base with clamping screw - Flat base.

The two ears are used to guide the router with both hands (or rather the 4 fingers). The open base is more suitable for radiussed key inlays, while the flat will be more effective on a flat surface. All you have to do is find a screw and nut that goes well (even if it means filing or sawing). Enjoy!

Temp: 200-210° / 50-60° speed : 40 mm/s slice : 0,2 mm infill : at least 33% (gyroïde) walls : 1,2 up to 1,4 mm cooling fan : 33%