ZELDRIA THE MAGE-FANART BY SPARX 3D print model

This was a shared commission piece , that allows me to sell the model after a period of time ownership by the Client. So here she is Zeldria the Mage, original art work by the artist Clyde Caldwell.it is labelled as Fan Art as no 3D sculpture or model exists of the concept and permission is given to sell the created model image. THIS MODEL CONTAINS “ADULT” BODY PARTS The bare breast and lower torso parts come as an alternative “nude” version, please do not open; Upper Torso Flash.stl & _Right_Leg_Flash_NO_foot.stl if you are offended by adult body parts. None of the Parts are interchangeable due to the model been wired for a colour changing LED (see pics) The front of the skirt is removable and is attached to the base using magnets. I have included the Tattoo images used, these are easy printed on colour ink jet and then a coat of lacquer onto the Transfer Slide paper that they are printed on. The model is1/6 scale at H350 x W140 x L135. With base 2 upper torso’s options 2 lower torso’s options 1 zip with tattoo images 1 zip with the SLA printable base 17 items in total. I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free. Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

TIPS: Resin Printing; Head, torso’s, base parts, are all hollow 2.40 Raft 95% Arms DO No Hollow Raft 95% specially the right arm as is tubed for wire already. Left Leg DO No Hollow Raft 95% as is tubed for wire already. Right foot is solid raft 100% Staff top and bottom is solid raft 100% (use plenty support!) Fire globe top is solid Raft 100% ( I printed in clear resin for LED) The 5 part base can all be hollowed 2.70 Raft 95% All parts on FDM were print tested at 0.12 speed 50 ALWAYS dry assemble and “trim” parts prior gluing. Paint all parts prior assembly id you wish to wire an LED