Epic Space Zombie World Builder

This set of 55 STL files includes terrain for the Tomb Worlds of 6-15mm sized robotic Space Zombies, including:

An elevated walkway system with 2, 3, and 4-way connectors, stairs, ramps, platforms, and supports for up to 6 different walkway levels at 8mm intervals; two small and one large obelisk; a moderately-sized pyramid; several spires with different geometries and décor; two transit gates; a communications array; straight and corner colonnades, and a small assortment of plaza tiles.

Several pieces (spire insert, colonnade columns, and the communications array crystal) are provided integrated and separate from their main features, allowing one to print these components in translucent resin for dramatic effect. If printing at original size, the columns can be made from colored 4mm plastic rods cut to the desired length.

The included terrain set scales well with 15mm miniatures; for smaller figure sizes (6-10 mm), printing components at 66.67 to 75% is recommended, depending on the user's preferences.

Files are recommended for FDM printing (all will print in resin, though warping may occur in some components at reduced scales due to suction forces) and come unsupported.

(NOTE: New files may be added to this collection in the future; if so, there's no additional charge for them – just log in and download the collection again when you receive the notification!).

Files are for non-commercial, personal use only. You may alter/edit files, but may not share your derivatives.