#Englisch#
I'd like to introduce here what improvements I have made to my printer.
My printer now prints at speeds up to 150 mm / s (normal at 95 mm / s) with an acceleration of 1800mm / s² and that at a volume of only 40db.
The print area is now 218 x 218 mm and 210 mm high
#1. Make it quieter#
Increase fan openings
https://www.thingiverse.com/thing:2706092 or check out the STL.s
Stepper drivers exchange TMC2208
Change bearings
3x ruthex RJ4JR-03-08 (floating bearing) and 4x igus RJ4JP-01-08 (fixed bearing)
For lubricating I use PTFE spray
https://www.thingiverse.com/thing:3342682
Replace the fans
U need 1 x 60/15 Axialfan, 2 x 50/10 Axialfan, 1 x 40/10 Axialfan
https://www.thingiverse.com/thing:2740298
Bauteilüfter
Titan TFD-B5015M12B fan, 50 x 50 x 15 mm
parallel with 10μF capacitor
https://www.thingiverse.com/thing:3553164
#2. Improve print quality / speed#
Swap Hotend for E3DV6
Check Y-carriage for ease of movement, reorient bearing supports and rods.
Swap extruder for gearbox
Align the threaded rods of the Z-axis, possibly using jaw couplings.
32bit Hardware https://www.thingiverse.com/thing:3629440
#3. Simplify levels#
attach a 4th bearing to the Y-carriage
https://www.thingiverse.com/thing:3342682
Silicone damper instead of springs
https://www.thingiverse.com/thing:2953731
Exchange the base plate for a stiffer one
https://www.thingiverse.com/thing:2953281
Endstopps
https://www.thingiverse.com/thing:3674784
Install BLTouch and update firmware (with meshbedleveling)
https://www.thingiverse.com/thing:3434119
without BL touch
https://www.thingiverse.com/thing:3249319
4. Miscellaneous
Drag chain
https://www.thingiverse.com/thing:2860786
Bowden Guide
https://www.thingiverse.com/thing:2385184
belt attachment
https://www.thingiverse.com/thing:2907768
Hotendsocke
https://www.thingiverse.com/thing:2916967
Filamentumlenkrolle
https://www.thingiverse.com/thing:2846443
https://www.thingiverse.com/thing:3207882
Universal filament spool holder
https://www.thingiverse.com/thing:3170109
Push fitting spacer ring
https://www.thingiverse.com/thing:2599869
toolholder
https://www.thingiverse.com/thing:2793693
#DEUTSCH#
Ich möchte gerne hier vorstellen, welche Verbesserungen ich an meinem Drucker eingebaut habe.
Mein Drucker druckt jetzt mit Geschwindigkeiten bis zu 150 mm / s (normal mit 95 mm /s)mit einer Beschleunigung von 1800mm/s² und das bei einer Lautstärke von nur 40db.
Der Druckbereich liegt nun bei 218 x 218 mm und 210 mm Höhe.
#1. Leiser machen#
Lüfteröffnungen vergrößern
https://www.thingiverse.com/thing:2706092 oder schau bei den STL.s
Steppertreiber tauschen TMC2208
Lager wechseln
3x ruthex RJ4JR-03-08 (Loslager) und 4x igus RJ4JP-01-08 (Festlager)
zum schmieren benutze ich PTFE-Spray
https://www.thingiverse.com/thing:3342682
Lüfter tauschen
Dazu braucht man 1 x 60/15 Axiallüfter, 2 x 50/10 Axiallüfter, 1 x 40/10 Axiallüfter mit 12 V
https://www.thingiverse.com/thing:2740298
Bauteilüfter
Titan TFD-B5015M12B Lüfter, 50 x 50 x 15 mm Radial
mit 10µF Kondensator paralellschalten
https://www.thingiverse.com/thing:3553164
#2. Druckqualität / Geschwindigkeit verbessern#
Hotend gegen E3DV6 tauschen
Y-Schlitten auf Leichtgängikeit prüfen, Lagerhalterungen und Stangen neu ausrichten.
Extruder gegen einen mit Getriebe tauschen
Gewindestangen der Z-Achse ausrichten, eventuell Klauenkupplungen verwenden.
32 bit motherboard https://www.thingiverse.com/thing:3629440
#3. Leveln vereinfachen#
anbringen eines 4ten Lager am Y-Schlitten
https://www.thingiverse.com/thing:3342682
Silikondämpfer statt Federn
https://www.thingiverse.com/thing:2953731
Grundplatte gegen eine steifere tauschen
https://www.thingiverse.com/thing:2953281
Endschalter
https://www.thingiverse.com/thing:3674784
BLTouch installieren und Firmware aktualiesieren (mit Meshbedleveling)
https://www.thingiverse.com/thing:3434119
ohne BLTouch
https://www.thingiverse.com/thing:3249319
#4. Sonstiges#
Schleppkette
https://www.thingiverse.com/thing:2860786
Bowdenguide
https://www.thingiverse.com/thing:2385184
Riemenbefestigung
https://www.thingiverse.com/thing:2907768
Hotendsocke
https://www.thingiverse.com/thing:2916967
Filamentumlenkrolle
https://www.thingiverse.com/thing:2846443
https://www.thingiverse.com/thing:3207882
Universal Filamentspulenhalter
https://www.thingiverse.com/thing:3170109
Pushfitting Abstandsring
https://www.thingiverse.com/thing:2599869
Werkzeughalter
https://www.thingiverse.com/thing:2793693
Videos
https://youtu.be/wlUfFMJELhs
https://youtu.be/nZ6jUDHfvm0