Charizard rises from the flames as he bursts forth from this Hybrid HueForge Card. The favorite dragon (who's not a dragon) has now appeared.

Print Instructions:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm

The Model is 107.43x150.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Orange Transmission Distance: 7.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #21 (0.88mm) swap to Red
At layer #31 (1.28mm) swap to Orange
At layer #34 (1.4mm) swap to Yellow
At layer #41 (1.68mm) swap to Jade White for the rest.