Print in place - Crazy Marble Fidget Toy V2 by Binrux3D

Binrux3D

Toys & Games>Other Toys & Games

GIF

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Ultra smooth 14mm ball, 0.08mm layer

Designer

26 min

1 plate

5.0(4)

Full sized model

Designer

3.2 h

1 plate

3.8(6)

14mm ball

Designer

15 min

1 plate

Boost

120

141

Released

Description

Model:

Crazy desk marble fidget toy! This took way too many prototypes!

Printing:

Use provided print profiles for best results! Sadly this model worked well with only as a full size model, so no down scaled models this time!

Feel free to scale the model down, functionality will be limited however!

The full-sized print profile is intended for use with 14mm balls. You can use the provided print profile for the ball, or use a real marble, or the Bambu Store 14 mm balls.

Print does not require any supports or assembly. Works straight out the bed!

!IMPORTANT!

The ball needs to be cleaned after printing from all of the support residue. Use side cutters or a knife to get it round! Really important with this model!!!

Hope you enjoy the model!

Comment & Rating (25)

@ZakoJaz

Print Profile

Full sized model

theres problem with this print profile!

Support Issue

The designer has replied

@Binrux3D

What was the problem here?

@ZakoJaz

As you can see from the picture where the broken part was, that area is too thin that the bed wasn't able to hold and it fall off mid print. note that i have already clean my bed with dish soap, calibrated and printed with brim. printed other bunch of stuff and have no issue. saw someone rated for this print also having adhesive issue, probably the same as mine. I not saying everyone will have this problem, but the chances of having that area falling off is there.