Long ago I had made up some Bananas for Scale and I by chance happened to have yellow, red, green, and blue in one of my AMS units the other day, reminding me “you never remade those bananas…”
So… I did! Traced out a nice and thick 9" banana.
If you want to use it to actually measure things, the distance between the center of the marks is 2 16/94" (58.3mm) 🤣
It's honestly just my take on a silly meme that used to be common in the printing world, while adding in a poke at the different units of measurement:
Two versions available - one with embedded features to be printed face-down, one with elevated features to be printed face-up (only one color swap). Plates separated in to singles and a very full single plate with all three. Ironing is enabled on the top-most layer for the raised feature version. They all have two holes for 6x2mm magnets if you want to embed some.
Embedded or “inlaid” version
Elevated or single-material swap version.