Some famous cartoons cookie cutters, playdough stamps - using playdough can be a little bit tricky as is way to sticky but it works -, ceramic/clay cutter and stamp.
The cutting size is 10mm and the stamping size is 5mm. You will need a 0.2 nozzle as the designs have wery thin lines for stamping part. I best printed these with 0.08mm without brim or any other adeshion required.
The size present in 3mf is the minimum i was able to scale it to take the advantage of 0.2 mm nozzle. Scaling up might allow printing with 0.4 nozzle but highly not recomended unless you need a huge size cutter ( for clay or ceramic stuff perhaps )
models are not tested yet with cookies. will add more images once i get the chance. if you can test them with 5 mm to 10 mm height dough please post images :-)
If requested, i will upload the stamping at different size depth for now is 10mm depth with first 5 mm as cutter and next one as stamp.
Models included:
Elmer Fudd
Sylvester
Daffy Duck
Speedy Gonzales
More models in progress!