This is a custom front plate for the Beta FPV VR02 goggles, it features 2 files, a flat front plate, which can customized to your liking, and a geometrical front plate (my favorite) that adds style to your goggles. If you share, make adaptations of this work, or repost it, please credit me. (If anyone has the VR03 please test this model on it and let me know if it works)

Step One

To put the front plate on the goggles, you will need a screwdriver, and some sort of heat gun or hairdryer. You first take off the cushion of the goggles (its Velcro), then unscrew the four screws and take off the black part (it clips on).

Step Two

Next unscrew the four screws on the bottom of the goggles and slowly lift the two halves (the top and bottom of the goggles) apart (MAKE SURE ALL THE TECHNOLOGY STAYS IN THE TOP HALF) you will now be able to slide out the original front plate.

Step Three

Take the 3D printed front plate and heat it up using the heat gun, then once its soft (just soft enough to bend), form it over the original front plate until they both have the same shape (DO NOT HEAT THE ORIGINAL FRONT PLATE) .

Step Four

Slide the new front plate in the goggles and put them back together (you may have to make adjustments to the 3D printed front plate so it can fit).

Step Five

Enjoy the new look of your BetaFPV VR02 Goggles!