Girld, Katana and tatoos by Art3Digital

Art3Digital

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 1 walls, 100% infill

Designer

14.8 h

1 plate

5.0(1)

9h11m, 0.08mm layer, 2 walls, 100% infill

9.2 h

1 plate

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140.11x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 4mm and the Actual Depth is 4.1mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Beige
At layer #34 (2.8mm) swap to Ivory White
At layer #43 (3.20mm) swap to Ash White for the rest.

Comment & Rating (2)

@paserak

I managed to print out the previous (huge) version. It looks great. However, I have a nagging feeling that the model has become too thick. Normally, a thickness of about 2.5 mm should do.