Never struggle to apply electrical tape to your spools again! So satisfying to use, too!

Bambu Lab says never to use cardboard spools in your AMS due to the damage and inconvenience it can cause. But we all know some of the best filaments come on those darn spools! You may have tried printing spools and spool adapters, only to have them not work on every filament brand… Why keep all those spools and adapters around when you can just apply electrical tape* to the edges?

Here's a SPOOL TOOL that you can use to apply your AMS-saving tape perfectly to every single spool! Also, never lose the end of your tape again! Just slap a roll into this convenient dispenser so it's ready when you need it!

Apply the tape perfectly every time!

And finally, it's so easy to replace the tape!

Notes:

• If you have this electrical tape* (my favorite) or one with an ID of ~29-32mm, you can print the “adapter” (second build plate). This is because I had to adjust the dimensions to support other tapes, such as this one* for V2. Most tapes should still work; some just fit more snugly with the adapter.

Gridfinity user? Keep your SPOOL TOOL at arm's reach with this 2x2 bin!

Love this model? Here are some ways to support my work:

• Buy my favorite brand of tape for your cardboard spools*!
• Buy my favorite brand of filament for your parts*!
• Buy me a coffee* (fuel my caffeine addiction)!
• Read my blog!
• Get Arc*, my favorite browser, for free!

Change Notes

• SPOOL TOOL V2
  • 5/17/2024: Initial release of Spool Tool V2
    • Should now be compatible with a wider range of tapes, added an adapter for tape rolls with larger IDs.
    • Adjusted geometry for easier assembly (tape should no longer get smooshed)

• SPOOL TOOL V1
  • 5/5/2024: Added notes on expected tape dimensions. No changes to the model geometry or print profiles.
  • 5/3/2024: Re-uploaded uploaded STL as two separate parts. No changes to the model geometry or print profile. Renamed to “SPOOL TOOL”

* Affiliate link