Omaggio ai campioni d' Italia stagione 2023/2024

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue
At layer #24 (2mm) swap to White for the rest.

Thank you!!