Print at 10% infill with a layer height of 0.2 mm with a base layer of 0.2 mm

Filaments Used:
PLA Light Blue
PLA Fuchsia Pink
PLA Red
PLA Pink
PLA Light Pink

PLA Green
PLA White

Swap Instructions:
Start with Light Blue
At layer #5 (1.00mm) swap to Fuchsia Pink
At layer #9 (1.80mm) swap to Red
At layer #13 (2.60mm) swap to Pink
At layer #17 (3.40mm) swap to Light Pink
At layer #21 (4.20mm) swap to White

At layer #25 (5.00mm) swap to Green

At layer #29 (5.80mm) swap to Red for the rest.

Original size 200 mm x 200 mm x 6,4 mm

Frame: https://makerworld.com/en/models/402349#profileId-303962

Design for non-commercial prints only!!!