This is a bracket to attach to the back of your printer and fits to existing screw holes (see diagram image) for adding a hot swappable 100mm exhaust pipe for ventilation.
Items used:
Instructions:
Use a standard M3 thread tap to thread the three unused holes on the panel (no drilling required).
You can use about a 10mm long screw no issues. The holes on the model line up perfectly and have a small tolerance to account for material shrinkage. The second printed part you need to tape to the insulated flexible pipe as shown in the photos and there is a slot which is locks onto with a small turn and allows you to hot swap your hose with other devices.
Printed and tested on a bambulabs P1S.