Cute mushroom style table lamp printed in four separate parts.

The cap is simply held to the stalk by a collar, allowing it to be easily removed witout the use of tools when changing the light bulb.

I recommend printing the inner and outer "mushroom cap" parts solid to reduce light bleed through and thus avoiding revealing any infill pattern when the light is turned on.

The inner and outer cap are glued together after printing. The stalk and stalk cap are also glued together but ONLY AFTER INSTALLING THE LAMP SOCKET! I'd recommend Locktite Power Gel-glue or equivalent for PLA.

The lamp is designed for using this socket: https://www.clasohlson.com/fi/Lamphallare-med-lampsladd-E14/p/36-6033

The following LED bulb is used in the pictures: https://www.clasohlson.com/fi/Dimbar-LED-lampa-klot-E14-Clas-Ohlson/p/36-6844

Only use LED bulbs with this lamp!

Let me know if I should also design a version for the “LED Lamp Kit 001”.