Fallout - Need a Boost? - 6 Colour
This file design was a Patreon subscriber request. Please check out my Patreon for more details if you're interested to know how you can request your own design as well, or acquire a commercial license for selling your printed copies of my designs. https://www.patreon.com/CanadianGamer3DPrintsEDM
Other Patreon Requests can be found in this Collection here: https://makerworld.com/@CanadianGamer/collections/1084474
-----------------
The pictured Frame is a friction fit design for 150x225 Hueforges
https://makerworld.com/en/models/432975#profileId-337616
In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
And if you scale it down, I have frames for 100x150 here:
https://makerworld.com/en/models/173529#profileId-190705
Please post a picture of your printed copy! I'd love to see it!
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x225.25mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Dark Brown Transmission Distance: 2.1
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Silver
At layer #16 (1.36mm) swap to Dark Brown
At layer #19 (1.6mm) swap to Latte Brown
At layer #22 (1.84mm) swap to Jade White for the rest.