Camp Stove

Project for the construction of a wood stove for camping.
TRANSLATED WITH GOOGLE TRANSLATOR FROM ITALIAN
Once the archive has been downloaded, inside you will find the DWG file and the PDF files; the pdfs correspond to the different ones
pieces that make up the removable camp stove (however I will insert the STLs of the components).

NB) the camp stove is not for 3D printing, but rather to be made using sheet metal
metallic; in my case, I used a scrap sheet of metal (probably an old duct
of ventilation XD), with a thickness of approximately 1 mm

For creation using CNC machines I leave the DWG file

To make the stove in an artisanal way:
NB) IF YOU DO NOT HAVE SUFFICIENT EXPERIENCE TO IMPLEMENT THE PROJECT, DO NOT TRY IT
WHEN DOING IT, IF NOT THERE IS ANY RESPONSIBILITY IF YOU GET INJURED
IN BUILDING IT

1) print the pdf files on A4 paper (NB make sure the printer prints
without distorting the image)
2) cut out the various components from A4 sheets
3) glue the various pieces of the stove cut from A4 sheets onto the sheet metal
4) cut out the various pieces of the stove from the metal sheet and create the various ones
holes (personally I used a grinder with abrasive disc for metals, a dremel with
abrasive disks and tips and a column drill with iron tip)

NB) IF YOU DO NOT HAVE SUFFICIENT EXPERIENCE TO IMPLEMENT THE PROJECT, DO NOT TRY IT
WHEN DOING IT, IF NOT THERE IS ANY RESPONSIBILITY IF YOU GET INJURED
IN BUILDING IT

3d printing