Rugged Deburring Tool Case With Latches 150mm Remixed by Boss Tech Print Innovations

Remixed by

Boss Tech Print Innovations

Tools>Other Tools

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

6.4 h

4 plates

4.0(2)

Boost

Released

Description

Deburring Tool Case

Assembly

You will need six 20 mm long M3 screws to assemble it. The magnet used for holding the tool in place is 6mm x 3mm.

Super glue can be used to hold the magnet and inserts in place if the friction fit is not strong enough.

Comment & Rating (2)

@Mr.Diaz

Print Profile

0.2mm layer, 2 walls, 15% infill

I've printed 3 boxes so far due to the hinges braking very easily while opening the case, I've made sure that the screw wasn't tight as well. I was very carefull when I put the screws in. I don't know if there is a way to reinforce the hinges or if it has to do with the filament I used. I printed this boxes with Bambu Lab PLA two tone, any suggestions are very well appreciated as I really like this design! Thank you to the creator for your hard work!