Hi!
This is a simple sailboat that I made using Creo program with a stand that I made for it.
It is meant as a simple decoration or a gift for those who like boats and sailing.
Feel free to ask for help.
File sharing is not allowed.
For print orientation see the uploaded picture.
Original boat size is (15.41 x 45.37 x 55.15) mm.
Post processing is recommended (sandpapering after removing supports + painting) or using different materials for easier removing of supports.
You can scale it up if you want.
Layer height: 0.12 mm
Infill: 15 - 25 %
Supports: YES (Touching Buildplate only)
Build plate adhesion: Brim