GPD win mini 散热背夹，这个版本是根据森林大佬开源方案魔改的，有微微的不同 ，优化了磁吸方式，加了手柄套件。（原版开源磁吸孔也有保留）

需要自己动动手，准备工具和材料有：电烙铁，手办模型胶（5400快干胶也行）*1瓶，600#砂纸，

0.3mm漆包铜线*0.5米，

GPD win mini Cooling Clip, this version is based on the Forest Boss open source scheme magically modified, there are slight differences, the magnetic suction method is optimized, and the handle kit is added. (The original open-source magnetic hole is also retained)

You need to do it yourself, and the tools and materials you need to prepare are: electric soldering iron, figure model glue (5400 instant adhesive is also OK) *1 bottle, 600# sandpaper,

0.3mm enameled copper wire*0.5m,

3007/V5 风扇 *2 购买链接：https://item.taobao.com/item.htm?spm=a1z09.2.0.0.7f392e8ddQJG67&id=710466976172&_u=qvk23fnf24c
买5v

3007/V5 Fan *2 Purchase link: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.7f392e8ddQJG67&id=710466976172&_u=qvk23fnf24c
Buy 5v

PD诱骗插母座USBTYPEC-24P带芯*1 购买链接：https://item.taobao.com/item.htmspm=a1z09.2.0.0.7f392e8ddQJG67&id=712626950868&_u=qvk23fn6bc8
买白灯5v(灯可以焊掉省电）

PD Decoy Socket Socket USBTYPEC-24P with Core*1 Purchase link: https://item.taobao.com/item.htmspm=a1z09.2.0.0.7f392e8ddQJG67&id=712626950868&_u=qvk23fn6bc8
Buy white light 5V (the lamp can be welded off to save electricity)

强力磁铁强磁圆形长方形小吸铁石 长20宽10厚2 *2

Strong magnet: strong magnet, round rectangle, small magnet, 20 length, 10 width, 2 *2

小号方形铁盒贴片（4.1cm*2.2cm 或者更小点点的铁盒贴片）*2

Small square tin box patch (4.1cm*2.2cm or smaller dot tin patch)*2

Type C 延长转USB-C弯头转接线 （0.1M;CMUP-CMLE）*1

供电线：https://item.taobao.com/item.htm?spm=a21n57.1.0.0.2812523cP0bFbD&id=718017081086&ns=1&abbucket=4#detail
买CMUP-CMLE,0.1m

Type C Extension to USB-C Elbow Adapter Cable (0.1M; CMUP-CMLE）*1

Power line: https://item.taobao.com/item.htm?spm=a21n57.1.0.0.2812523cP0bFbD&id=718017081086&ns=1&abbucket=4#detail
Buy CMUP-CMLE, 0.1m

没有链接的剩余淘宝 和阿里巴巴自己按型号很好就搜索出来了。 国外的朋友可以看看自己当地的网站自行购买。

The remaining Taobao without links and Alibaba themselves searched out by model number very well. Friends abroad can look at their local websites to buy on their own.

组装步骤：

1.拆去3007/V5 风扇+-极线，用0.3包铜线替换（注意做记号标记，风扇正负极避免忘记）

2.将两个风扇负极铜线极焊在USB母座 G （gnd）位置上，正极焊在V（VCC）位置上。

3.将多余线材理好放入预留孔内，盖上盖板。

4.将方形磁铁用胶水粘在手柄架上。

5.将贴片粘在掌机壳上。

Assembly Steps:

1. Remove the 3007/V5 fan +- pole wire and replace it with 0.3 copper wire (pay attention to make a mark, avoid forgetting the positive and negative poles of the fan)

2. Solder the two negative copper wire poles of the fan on the USB female G (gnd) position, and the positive electrode on the V (VCC) position.

3. Put the excess wire into the reserved hole and cover the cover.

4. Glue the square magnet to the handle holder.

5. Glue the patch to the handheld case.

我和森林大佬一样开源这个手柄，但是不希望它作为商用在咸鱼或者其他平台售卖。

只希望大家能共同改造并，完善GPD mini 。