This is my take of an AI generated Honda Civic FN2 (which I also once owned :D )
Looks really better when printed than in BambuLab Studio after slicing!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic black Transmission Distance: 1
PLA ESUN RED Transmission Distance: 3
PLA Generic White Transmission Distance: 2.9
Swap Instructions:
Start with black
At layer #7 (0.64mm) swap to RED
At layer #13 (1.12mm) swap to White for the rest.