Print at 10% infill with a layer height of 0.2 mm with a base layer of 0.2 mm

Filaments Used:
PLA Blue
PLA Green
PLA Light Green
PLA Grey
PLA Yellow
PLA Light grey
PLA White
PLA Light blue

Swap Instructions:
Start with Yellow
At layer #5 (1.00mm) swap to Blue
At layer #9 (1.80mm) swap to Light Grey
At layer #13 (2.60mm) swap to Light Blue
At layer #17 (3.40mm) swap to Blue
At layer #21 (4.20mm) swap to Grey

At layer #25 (5.00mm) swap to White

At layer #29 (5.80mm) swap to Light Green

At layer #25 (6.60mm) swap to Green for the rest.

Original size 200 mm x 200 mm x 7,2 mm

Frame: https://makerworld.com/en/models/402349#profileId-303962

Design for non-commercial prints only!!!