Kat - Devil May Cry - Collectible Rare Model

When you download you will have 19 Stl Files

FULL PARTS

Full Body With Base + Props
Full Body With Base + No Props
Kat Base
Kat Figure
Kat Prop

DISASSEMBLED PARTS

1.Kat Base Disassembled
2.Kat Hip Disassembled
3.Kat Left Leg Disassembled
4.Kat Right Leg Disassembled
5.Kat Upper Body With Head Disassembled
6.Kat Left Arm Disassembled
7.Kat Right Arm Disassembled

SLICED FLAT CUT PARTS

1.Kat Base Sliced Flat Cut
2.Kat Hip Sliced Flat Cut
3.Kat Left Leg Sliced Flat Cut
4.Kat Right Leg Sliced Flat Cut
5.Kat Upper Body With Head Sliced Flat Cut
6.Kat Left Arm Sliced Flat Cut
7.Kat Right Arm Sliced Flat Cut
This product is Nuskul Art Collectible Edition.
Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models
You can send me a message about the model or in general.
You can also reach me via social media.

Twitter : https://twitter.com/YunusKullebi
Instagram: https://www.instagram.com/yunuskullebi/
Instagram : https://www.instagram.com/nuskulart/
Linktr : https://linktr.ee/yunuskullebi

Print Temperature : : 205
Table Temperature : 60
Layer Height : 0.2 mm
Intıal Layer Heigt : 0.2 mm
Wall Line Count : 0.4 mm
Fill Density : % 20

Support Settings

Support Stracture : Tree
Maximum Branch Angle : 60
Branch Diameter : 3
Trunk Diameter : 16
Branch Diameter Angle : 5
Support Placement : Everywhere
Prefferred Branch Angle : 25
Diameter İncrase to Model : 1
Minimum Height to Model : 3
Intial Layer Diameter : 6
Branch Destinty : 20
Tip Diameter : 0.8
Limit Branch Reach : Yes
Optimal Branch Range : 30
Rest Preference : On Model if Required
Support Overhang Angle : 55
Support Pattern : Gyroid
Connect Support Lines : Yes
Support Density : 5
Support Line Distance : 8
Intial Layer Support Line Distance :8
Support interface Thicknes : 1.2