This is the short version of my trusty clip to snap on the edge of the Bambu spool. Shape and measurements have been optimized to further improve attachment to the spool and the shortening allows you to further reduce printing times and the quantity of filament used.

This clip will never come off accidentally and you can slide it along the edge to find the best position to hold the filament.

You can use the clip with the AMS Lite without having to detach it, but if you are going to put the spool in the closed AMS you must first remove the clip. If you want a clip that doesn't have to be detached when using the closed AMS, consider downloading my “Bambu Spool filament Clip internal” or the newest “Dual Slot Filament Clip”.

Please note: before downloading and printing third-party profiles, check that these have been first tested by the author and that they do not upload stolen images from those published by other users. Also check that the profile does not compromise strength, quality and printability just to save a couple of minutes of printing. This warning is not to discourage the contributions of many good designers, but to help exclude from Makerworld the many dishonest people who only upload rubbish!