This is a simple glue stick holder for the X1/P1 series. It slips over the inner frame and is thin enough to allow the glass top to sit flush. It fits the Bambu glue stick - I have not tested other brands of glue sticks. If you do, please leave a comment on whether they fit or not (hole diameter is ~25.1mm).

If you like this holder, please check out the other models in this series. If you have any suggestions on other models to add, please drop a comment!

Flush Cutter Holder: https://makerworld.com/en/models/171018#profileId-187705

Glue Stick Holder: https://makerworld.com/en/models/179272#profileId-197193

Filament Clips Holder: https://makerworld.com/en/models/179273#profileId-197194

Filament Clips Holder XL: https://makerworld.com/en/models/208140#profileId-228205

Amervault 3D-Print Tool Holder: https://makerworld.com/en/models/179274#profileId-197195

Generic 10mm Hook: https://makerworld.com/en/models/208157#profileId-228216

Calipers Holder: https://makerworld.com/en/models/217585#profileId-236556