Desiccant holder, Silica Gel , Dry Box Accessory
Copyright Claim
Desiccant holder, Silica Gel , Dry Box Accessory
Boost
19
35
24
Print Profile(2)
0.2mm layer, 2 walls, 35% infill
Designer
24 min
1 plate
Profile for A1 mini, 0.2mm layer, 2 walls, 35% infill
25 min
1 plate
Boost
19
35
24
0
82
121
Released
Description
Just a simple box to hold Desiccant / Silica Gels.
It's thin profile allows me to put this in 4L cereal containers where I store my open filament.
Keep your filament dry!
Note: Please use my print profile in order for the holes to appear. I have set it up so that the top and bottom shells are removed, and thus you will see the infill pattern (the holes) once you preview the slice.
This tip/trick allows me to build a simple design in freeCAD, and use Bambu Studio settings to get the desired hole patterns.
Comment & Rating (24)
All
Print Profile
Profile for A1 mini, 0.2mm layer, 2 walls, 35% infill
thank you to whoever uploaded the a1 mini profile. I've printed it and it works great on my a1 mini. I'm the model designer and really appreciate that you did this for my model!
The designer has replied
1
Reply
You are welcome. And thank YOU for making the model. Works great, prints really well and very quickly. Really smart design.
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 35% infill
Best for Samla 45L!
The designer has replied
1
Reply
thank you for the comment and rating!!
0
Reply
The no surface layer, and the infill pattern to use for filter hole great idea! Simply but very useful, and very quick to print!!! THUMBS UP!
The designer has replied
1
Reply
thank you!
0
Reply
Print Profile
0.2mm layer, 2 walls, 35% infill
nice model
The designer has replied
1
Reply
thank you for the comment and rating!
0
Reply
Crazy, when I import it there are no holes in the lid?
The designer has replied
0
Reply
use my print profile, preview slice, and magically you now see the holes, which is just the infill pattern
2
Reply
Replying to @kellytrinh
Got it, for some reason your profile wasn't coming over, we are 40 in and good to go :)
1
Reply
Print Profile
0.2mm layer, 2 walls, 35% infill
works great
(Edited)The designer has replied
0
Reply
"works great" :) Thank you!! appreciate the comment and rating!
0
Reply
Print Profile
0.2mm layer, 2 walls, 35% infill
I scaled it to 200% it works great. The opening lock is missing, it happened to me that it opened by itself and all the balls flew out.
The designer has replied
0
Reply
thanks, I designed it so that the snug fit of the lid held it in place. Perhaps at 200% it is no longer as snug of a fit? try increasing the lid size to 202% and keep the base at 200%
0
Reply
Print Profile
Profile for A1 mini, 0.2mm layer, 2 walls, 35% infill
Neat trick for the mesh grid, printed great with PLA!
0
Reply
Print Profile
0.2mm layer, 2 walls, 35% infill
The designer has replied
1
Reply
thank you again :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 35% infill
The designer has replied
0
Reply
thank you for rating!!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld