Dry Box Spool Station For K1

The dry box station for the K1 printer is mounted on top of the printer! On the dry box station you can install 2 tool boxes to choose from, there are 3 types, you can also install LED lights in the corners The station can be equipped with 4 small boxes that hold Creality filament spools (max 67mm) or 2 large boxes that can hold spools with a width of max 70mm or one spool with a width of max 80mm. Everything is printed easily, supports are needed only when printing dry boxes to facilitate their installation (you can print without supports but it will be difficult to install).

Filament Spliter - 4 tubes from the boxes are inserted into it, only 1 passes through, so you do not need to push the filament with your hands into the filament sensor when replacing it, just wind the unnecessary filament in the box and push the new one from the other box

To assemble the station you need M3.20mm bolts 24pcs, 16 bearings (608zz)

There are 2 types of small boxes: 1) With a regular hole into which a PTFE tube is inserted 2) With a recess for Threaded Bowden or PC4-M6

(On the photo)

Slicer: Creality print Plastic: Hyper PLA Layer height: 0.20 Line wight: 0.42 Wall lines: 2 Filling: 10% Temp nozzle: 220° Temp bed: 50°(If you use a bed with a rough surface, set the temperature to 60.) Print Speed: 300.00 Infill Speed: 300.00 Outer Wall Speed: 210.00 Inner Wall Speed: 240.00 Top Surface Skin Speed: 210.00 Top/Bottom Speed: 210.00 Cooling:on Ironing: off