Skip to content

Alligator 2 - 10 Shoot Magazine Package

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.4k views
  • 8 likes
  • 2 downloads
License
3D design format
ZIP Folder details Close
  • 10 Shoot Magazine Alligator II Extended.zip
    • Assembling Video.txt
    • Files to print/Cover/BambuSlicer.JPG
    • Files to print/Cover/Cover 10 Shoot Bambu Slicer.3mf
    • Files to print/Cover/Cover Left Back.3mf
    • Files to print/Cover/Cover Right Back.3mf
    • Files to print/Cover/Cover Right Front.3mf
    • Files to print/Cover/Instructions.txt
    • Files to print/Cover/Left Front.3mf
    • Files to print/Logo/Logo 10 Shoot Multicolor.3mf
    • Files to print/Logo/Logo 10 Shoot.3mf
    • Files to print/Magazine/Button Right Alligator II Extended (1).stl
    • Files to print/Magazine/Button Right Alligator II Extended.stl
    • Files to print/Magazine/Front Bottom Left.stl
    • Files to print/Magazine/Front Bottom Right.stl
    • Files to print/Magazine/Front Middle Part Left.stl
    • Files to print/Magazine/Front Middle Part Right.stl
    • Files to print/Magazine/Monster Back Middle Long Left.stl
    • Files to print/Magazine/Monster Back Middle Long Right Alligator II (1).stl
    • Files to print/Magazine/Picatinny Alligator Extended Left.stl
    • Files to print/Magazine/Picatinny Alligator Extended Right.stl
    • Files to print/Magazine/Picatinny Bottom Front.stl
    • Files to print/Magazine/Picatinny Front Alligator II.stl
    • Files to print/Magazine/Picatinny Side Front Left.stl
    • Files to print/Magazine/Picatinny Side Front Right.stl
    • Files to print/Magazine/Picatinny_Back_Long 2 Alligator II.stl
    • Files to print/Magazine/Pivot Alligator II.stl
    • Files to print/Magazine/Release Alligator II.stl
    • Files to print/Magazine/Side Left Alligator II.stl
    • Files to print/Magazine/Side Right Alligator II.stl
    • Files to print/Magazine/Stopper Alligator II.stl
    • Files to print/Magazine/Top Left Alligator II.stl
    • Files to print/Magazine/Top Right Alligator II.stl
    • Files to print/Tuning Trigger/Tuning Trigger 1.stl
    • Files to print/Tuning Trigger/Tuning Trigger 2.stl
    • Parts List 10 Shoot Magazine Alligator II Extended.pdf

Learn more about the formats
Publication date 2024-02-02 at 18:24
Design number 1756537
eheimgartner

eheimgartner

3D printer file info

3D model description

First of all!

Before you buying make sure it is legal to your country!
You build it at your own responsibillity and i´m not responsible for the consequences of using, building and possession. In addition to that you have to modify the crossbow in the back with an M3 insert.

Be aware that this is not a toy!
If you want to build this project, you must be experianced in 3D printing to get dimensionally accurate parts. Depending on your printer settings, maybe some parts need some fine tuning.

This is my new 10 shoot magazine for the Alligator 2 pistol crossbow with an new fore grip and an tuning trigger to complete the package.

For this magazine you have to disassemble the trigger safety!

I can´t garantuee that it works with all bolts because i don´t have all bolts from all manufactors. I only tested it with EK Archery Adder Training bolts and some cheap bolts from Amazon. I guess it should work fine with the most of all 7,5" bolts.

I highly recommend to use bolts with the same diameter… sometimes bolts are a little bit different and that can cause a jam. i did a lot of shoots without any issues. It‘s also very importend to check the bolts if they are damaged or bent. This also can cause an failure

Assembling video for magazine is in the files.

Parts-List is in the files with links where you can buy.

Feel free to ask if something isn´t clear. Thanks for you support.

Here you can find an short video:
https://studio.youtube.com/video/Tuq2SpFIPSc/edit

Speedloader:
https://cults3d.com/en/3d-model/various/speedloader-for-10-shoot-magazine-mankung-alligator-ii

Limb Blocks:
https://cults3d.com/en/3d-model/various/mankung-alligator-ii-limb-block-alligator-80lbs-limb

https://cults3d.com/en/3d-model/various/mankung-alligator-ii-limb-block-redback-80lbs-limb

https://cults3d.com/en/3d-model/various/mankung-alligator-ii-limb-block-alligator-80lbs-limb-eheimgartner

Hope you like it.

Files are only for privat use. Not commercial!!!

Things i use on my crossbow:

Diana 3x44 grün rot punkt visier
https://s.click.aliexpress.com/e/_DCqkH2p
Red Dot Laser Anblick Taktische 20mm Standard Picatinny
https://s.click.aliexpress.com/e/_DFpoTbF
Targets Sticker:
https://s.click.aliexpress.com/e/_DlR9mUv
https://s.click.aliexpress.com/e/_DBw7IQl
Taktische rmr romeo5 1x20 rot punkt visier holo
https://s.click.aliexpress.com/e/_DFIiONT

3D printing settings

All the parts i printed on my BambuLab X1C so with an print size of 256x256. I used for this project PLA+ and it worked pretty fine. I used 7 Walls, 7 Top- an Bottom Layers and 30% Gyroid Infill.

Categories

All designs › Various › Prototyping / Sports & outdoor

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.