Hex Mesh Customizable by recspeak

recspeak

Art>Other Art Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.5 h

3 plates

4.4(9)

Boost

167

194

205

Released

Description

Fully customizable and expandable hexagonal mesh fabric. Create designs without limits and without being constrained by build plate size or color range. Assemble, disassemble, and reassemble any way you like.

3 build plates: 1 with a single hex, 1 with an 8 hex assembly, and 1 with a 15 hex assembly

There are a lot of small pieces so if you don't use a brim (I didn't), make sure your build plate is clean and set to 60C during print for basic PLA.

DO NOT USE SILK - Silk PLA looks nice but completely falls apart during assembly.

Colors Matter: Certain colors produce different results. Purple, red, and bronze fit together well and pull apart fairly easily. Black had a much tighter tolerance and is much more difficult to disassemble.

Assembly Video:

Comment & Rating (15)

@Death259

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This is by far my favorite "chainmail" or "fabric" print. The flexibility you have to make this whatever size and whatever color pattern you want is awesome. This would be great for any cosplayer. I definitely will be printing more of this to at least make a gauntlet.