Salt Lake City Temple hueforge
No Ams needed. Just color swap at layers.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Metallic Silver Transmission Distance: 0.5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ IIID Max Teal Transmission Distance: 5.5
PETG JAYO Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA+ IIID Max Fuchsia Transmission Distance: 8
PLA+ IIID Max Pink Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA+ IIID Max Gold Transmission Distance: 9
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Metallic Silver
At layer #5 (0.48mm) swap to Black
At layer #7 (0.64mm) swap to Teal
At layer #9 (0.8mm) swap to Black
At layer #12 (1.04mm) swap to Red
At layer #13 (1.12mm) swap to Fuchsia
At layer #15 (1.28mm) swap to Pink
At layer #16 (1.36mm) swap to Orange
At layer #17 (1.44mm) swap to Gold
At layer #19 (1.6mm) swap to White for the rest.
 

Check out the Nauvoo temple hueforge:

Nauvoo Illinois Temple hueforge by dohara1985 - MakerWorld

Please "Like", review, follow and upload make.

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o