My father needed drawer baskets for his good old kitchen from the 70s. He tried to find drawer baskets suitable for these weird dimensions today, but he searched in vain. So what do I have a 3D printer for? 😊, so I designed some.
Drawer baskets in five sizes with lids.
Originally there was only the XL version, but now there are many smaller versions.
There are 5 different versions:
Length [mm] | Width [mm] | Height [mm] | |
Model XL | 204.0 | 124.5 | 60,0 |
Model L | 187.5 | 101.5 | 60.0 |
Model M | 124.5 | 101.5 | 60.0 |
Model M Long | 204.0 | 62.0 | 60.0 |
Model S | 101.5 | 62.0 | 60.0 |
Each of the baskets has two lid variants. One with and one without a handle.
Printing
All parts can be printed without supports. A 0.4 mm nozzle and a layer height of 0.20 mm with printer default settings for infill, etc. are sufficient for printing.
If you use the STL files, you should pay attention to the alignment of the lids. You should print them with the top side facing down (on the print bed).
There is nothing to assemble. Print and tidy up your drawers.