This is a remix of alecs.form's “Twisted flower pot”.

I just hollowed it out so I could create an inner pot for self watering.

You can print it for normal plants or use my inner pot for selfwatering.

Dimensions:

• inner diameter at the top: ~93.8mm
• inner diameter at the bottom: ~68.4mm
• inner height: 78.4mm
• wall thickness: 1.2mm

Settings:

• layer height: 0.2mm
• line width: 0.42mm
• wall loops: 3

Note:

As you scale the pot the wall thickness will also change and water could leak.

Feel free to upload your Makes!